Fantasy Portrait

1. Make a new canvas, we used 8″ x 10 “, 180 dpi.

2. Select the Gradient Tool, using two shades of blue (see below), fill your canvas, so that the darker colour will be on top.

http://loreleiwebdesign.com/wp-content/uploads/HLIC/eda9bf1fac802b517e57524bf45c3022.jpg

3. Take a photo from you collection of photographs to use for this assignment – any portrait of your choice. Crop the figure and paste on to your canvas. In needed, resize so that it fits in.

4. To get rid of the visible poor cropping, and to give the girl more emphasis, add blueish glow to her by going to Layer >> Layer Styles >> Outer Glow and applying the following settings:

http://loreleiwebdesign.com/wp-content/uploads/HLIC/b135eb0e83de1c64e0ac69c6f84a3a6f.jpg

This is what you would get:

5. Make a new Layer. Make sure your primarily and secondary colours are black and white. Go to Filter >> Render >> Clouds

http://loreleiwebdesign.com/wp-content/uploads/HLIC/d484e43dafea5cd402d994600312c5cb.jpg

And, if needed apply the clouds effect a several times to achieve the desired randomly “clouded” effect.

6. Reduce the opacity of the layer to semi-visible.

http://loreleiwebdesign.com/wp-content/uploads/HLIC/d5de0439e09da49491ecffc8890eb01d.jpg

7. Press Ctrl+T for free transform, and then right mouse click and “Skew”. Drag the left corner of the clouds layer, as shown on the illustration below:

Press “Enter” when you are done, then Ctrl + D to deselect the layer.

8. Duplicate the clouds layer. Select the upper layer and go to Edit >> Transform >> Flip Horizontal.

9. Select the girl’s layer from layers panel and drag it to the top, so that it would be your utmost upper layer.

Remember to remove the parts where layers turn to be on top of one another.

10. Take a photo of a lake with water circles. We used this one from Digital Free Photo, but again – this is optional.

Paste the layer unto your composition, so that the circles in the water will be “around” the girls or your main figure.

11. Using the Eraser Tool, remove the lower part of the girl’s layer, so create the illusion as if she is really sitting inside the water and the water circles are “from” her.

12. Set lake’s layer blending options to Luminosity.

13. Drag the Layers of the clouds on top of the water later and using eraser tool with soft edge (100px) remove the sharp parts, so that only the “steaming” clouds will remain, no edges.

14. Now to the hard bit – creating the plasma cycles.
Make a new layer (this is important) and place it on top of all the others.

15 Using the Elliptical Marquee tool, draw and ellipse. While the ellipse on the new layer is selected, Right-mouse-click and choose “stroke”. Apply the settlings below for the stroke effect:

16. Press Ctrl + T to free transform, and then right-mouse-click >> Prospective. Try to distort the round layer you have to it would look like the line is surrounding or flowing around the girl.

http://loreleiwebdesign.com/wp-content/uploads/HLIC/94c651aa8cbab5cafc511c65f08b9b89.jpg

17. Using the Eraser tool with big soft edge, remove the “farther” part of the round, behind her head, like this:

18. While this layer is selected, go to Layer >> Layer styles >> Outter glow and apply the following glow settlings:

http://loreleiwebdesign.com/wp-content/uploads/HLIC/5ccb93943e152d64bae67a3ac413be53.jpg

19. Duplicate the layer a several times and each time transform the round using the prospective settlings, so that the circles chaotically surround the main figure’s body.

http://loreleiwebdesign.com/wp-content/uploads/HLIC/4f1719304fa2facec5b724154f5f26d9.jpg

20. Remember to leave the “front” part of the circle visible and erase the “back” part of it. This is more or less what you should have by now:

http://loreleiwebdesign.com/wp-content/uploads/HLIC/6f7804b7e1f3030de5aa8b2ac7e508fa.jpg

21. Flatten the Layer.
22. Go to Image >> Adjustments >> Levels and apply the following settlings to give the image an overall bluish hue:

http://loreleiwebdesign.com/wp-content/uploads/HLIC/ce7dca14b19a189341d7bccc221e9a73.jpg

http://loreleiwebdesign.com/wp-content/uploads/HLIC/9eab6f697ab4ee216b3432bb7d09a926.jpg

23. Duplicate the layer.
24. While the upper layer is selected (and your background colour in the palette is set to white), go to Filter >> Distort >> Diffuse Glow and apply these glow settings.

25. Reduce the opacity of the “glowing layer” to 20% (or less, depends on your image).
26. Flatten the layer again to merge both layers into one.

27. Using some star brushes (download free on deviant Art resources page), apply the stars chaotically around and allover the glowing cycles.

28. Select the background layer (the artwork, not the stars) and to to Renters >> Lightening effect, apply the following spot light effect twice.

29. Get back to Stars layer, and go to Layer >> Layer Styles >> Outer Glow, and add the following glow using white #ffffff colour.

30. Duplicate the stars layer.
31. Go to Filter >> Blur >> Radial Blur and apply these settings.

You may choose to reduce the opacity of this layer if you feel the rounded blurred effect is too strong. That’s it, your artwork is ready: